Ir para o conteúdo principal

Como restaurar faltando Executar uma opção de script na regra do Outlook?

Você deve ter notado o execute um script opção desaparece do assistente de regras após uma atualização do Office. Isso impedirá que os usuários criem regras do Outlook com script VBA. Este artigo apresentará uma maneira de restaurar o que está faltando execute um script opção no assistente de regras do Outlook facilmente.

Restaurar ausente Executar uma opção de script no Outlook 2016

Restaurar ausente Executar uma opção de script no Outlook 2016

Para restaurar o que falta execute um script opção no assistente de regras do Outlook, faça o seguinte:

1. pressione Win + R juntas para abrir a caixa de diálogo Executar, na caixa de diálogo digite regedit no Abra caixa, e clique no OK botão. Veja a imagem:

2. Na caixa de diálogo pop-out User Account Control, clique no Sim botão. Veja a imagem:

3. Na janela do Editor de registro, abra o Segurança chave com o caminho abaixo:
HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 16.0 \ Outlook \ Security

4. Clique com o botão direito no Segurança chave e selecione Novo > DWORD (valor de 32 bits) no menu do botão direito e, a seguir, nomeie o novo DWORD como EnableUnsafeClientMailRules. Veja a imagem:

5. Clique duas vezes no EnableUnsafeClientMailRules DWORD para abrir a caixa de diálogo Editar valor QWORD. Veja a imagem:

6. Na caixa de diálogo Editar valor QWORD (64-BIT), digite 1 no Dados de valor caixa, e clique no OK botão. Veja a imagem acima.

7. Reinicie o Microsoft Outlook.

E agora você vai descobrir o execute um script opção no Passo 1: Selecione ação (ões) do Assistente de Regras.

Artigos Relacionados

Melhores ferramentas de produtividade de escritório

Kutools for Outlook - Mais de 100 recursos poderosos para turbinar seu Outlook

📧 Automação de e-mail: Fora do escritório (disponível para POP e IMAP)  /  Agendar envio de e-mails  /  CC/BCC automático por regras ao enviar e-mail  /  Encaminhamento automático (regras avançadas)   /  Adicionar saudação automaticamente   /  Divida automaticamente e-mails de vários destinatários em mensagens individuais ...

📨 Gestão de E-mail: Lembre-se facilmente de e-mails  /  Bloquear e-mails fraudulentos por assuntos e outros  /  Apagar Emails Duplicados  /  Pesquisa Avançada  /  Consolidar pastas ...

📁 Anexos Pró: Salvar em lote  /  Desanexar lote  /  Comprimir em Lote  /  Salvamento automático   /  Desanexação Automática  /  Compressão automática ...

???? Interface Mágica: 😊Mais emojis bonitos e legais   /  Aumente a produtividade do seu Outlook com visualizações com guias  /  Minimize o Outlook em vez de fechar ...

???? Maravilhas com um clique: Responder a todos com anexos recebidos  /   E-mails antiphishing  /  🕘Mostrar fuso horário do remetente ...

👩🏼‍🤝‍👩🏻 Contatos e calendário: Adicionar contatos em lote de e-mails selecionados  /  Dividir um grupo de contatos em grupos individuais  /  Remover lembretes de aniversário ...

Sobre Características 100 Aguarde sua exploração! Clique aqui para descobrir mais.

 

 

Comments (24)
No ratings yet. Be the first to rate!
Graham
Graham
This comment was minimized by the moderator on the site
You switched from 32 bit to 64 bit without explanation. See "New > DWORD (32-BIT Value)" then after "6. In the Edit QWORD (64-BIT)". Which is it ? Or is it both?
Reply
0
0
jrlongoria@gmail.com
This comment was minimized by the moderator on the site
You change from DWORD to QWORD at the end.
It should be DWORD
Reply
Report
0
0
Max
Max
This comment was minimized by the moderator on the site
Great! Thanks
Reply
0
0
Ethan H
Ethan H
This comment was minimized by the moderator on the site
This worked for me in Outlook for Office 365. Once point to clarify, the instructions flip-flop between DWORD and QWORD, which are mutually exclusive. I used DWORD and it worked.
Reply
0
0
FerretWilliams
FerretWilliams
This comment was minimized by the moderator on the site
I also didn't have a security folder. To get around the issue, I set a rule to forward all emails fitting a specific rule to IFTTT so I can use their automation instead. Won't work for everybody, and attachments get a long number added to them if saving to Dropbox.
Reply
0
0
dan
dan     FerretWilliams
This comment was minimized by the moderator on the site
what applet did you use on IFTTT, or did you make your own?
Reply
0
0
FerretWilliams
FerretWilliams     dan
This comment was minimized by the moderator on the site
I set an email trigger, and set the action to be to save to Dropbox. However, I've since switched to Microsoft Flow for saving Gmail directly to Dropbox. My specific goal was to save Gmail attachments to Dropbox, and Flow worked best for that after IFTTT dropped support for reading emails from Gmail.
Reply
0
0
Sagar
Sagar
This comment was minimized by the moderator on the site
I Don't Have a security folder after HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook
Reply
0
0
IT Engineer
IT Engineer     Sagar
This comment was minimized by the moderator on the site
It's because Microsoft has yet again changed something concerning this feature. Most likely, this registry key path has completely changed, or has been outright omitted. I have a Premier Support ticket open with MS currently to have them provide us the CORRECT registry setting for Office2016/2019 current monthly channel to bring the Run a Script in Rules Actions back. It is completely unacceptable for MS to continue to alter/omit features like this without clear & priority notification to clients. I understand the security risks behind using such a feature, but in certain scenarios, this still is used.
Reply
0
0
Azza
Azza     IT Engineer
This comment was minimized by the moderator on the site
By playing around I found the correct key:
Computer\HKEY_USERS\{whichevertheuserkeyis}\Software\Microsoft\Office\16.0\Outlook\Security

So do not use HKEY_Current_User, instead use HKEY_USERS
Reply
0
0
Jason
Jason
This comment was minimized by the moderator on the site
This doesn't seem to work for Outlook 2013. Is there a method that will work for this version? Also, your instructions reference DWORD and the images imply QWORD.
Reply
0
0
Lukie
Lukie     Jason
This comment was minimized by the moderator on the site
For 2013 I used HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Security and DWORD EnableUnsafeClientMailRules with value 1.
Each version of office has its own folder in "HKEY_CURRENT_USER\Software\Microsoft\Office\"

You also need to allow the macro to run in outlook 2013:

File -> Options -> Trust Centre -> Trust centre settings
-> Macro settings -> "Notifications for all macros"

This will ask you to allow the macro the first time the rule runs, but be careful not to allow any other unknown macros during day to day use. You could also use a digitally signed macro, and only allow digitally signed ones to run.

Then create your script, create a rule that runs it, and you should be set.
Reply
0
0
Marine
Marine     Lukie
This comment was minimized by the moderator on the site
Did not work for me.  I have Outlook 2013, but maybe now that Office 365 has overstepped this setting somehow.  I have the trust settings enabled to notify for all Macros.
Reply
0
0
Espen
Espen
This comment was minimized by the moderator on the site
DWORD or QWORD? A bit confusing to understand which to use... Had to create DWORD to make it work. Thanks
Reply
0
0
Rafal
Rafal
This comment was minimized by the moderator on the site
Do You have instructions how to enable this option also for outlook 2010?
Reply
0
0
abhi
abhi
This comment was minimized by the moderator on the site
Thank You! It worked for me and as mentioned in one of the comments below, Step 6 was DWORD dialogue box for me.
Reply
0
0
There are no comments posted here yet
Load More
Please leave your comments in English
Guest
Posting as Guest
×
Rate this post:
Reset
0   Characters
Suggested Locations