Ir para o conteúdo principal

Como identificar e selecionar todas as células mescladas no Excel?

Você sabe como localizar e selecionar todas as células mescladas no Excel? Aqui estão três maneiras interessantes e complicadas de identificar e selecionar rapidamente todas as células mescladas em uma seleção ou intervalo no Excel.

doc selecionar células mescladas 4

Identifique e selecione todas as células mescladas com o comando Localizar

Selecione e conte rapidamente todas as células mescladas com o Kutools para Excel

Identifique todas as células mescladas com o código VBA


Identifique e selecione todas as células mescladas com o comando Localizar

Você pode identificar e selecionar todas as células mescladas na planilha ativa por Encontre comando com as seguintes etapas:

1. Clique no Início > Encontrar e selecionar > Encontre para abrir o Localizar e substituir caixa de diálogo. Você também pode abrir o Localizar e substituir caixa de diálogo pressionando o Ctrl + F chaves.

2. Clique no Formato botão na caixa de diálogo, (se você não conseguir descobrir o Formato botão, por favor clique no Opções para expandir a caixa de diálogo.) veja a captura de tela:

doc selecionar células mescladas 1

3. No surgimento Encontrar formato caixa de diálogo, marque apenas o Mesclar células opção no Controle de texto seção sob Alinhamento guia e clique em OK.

doc selecionar células mescladas 2

4. Agora você volta para o Localizar e substituir caixa de diálogo, clique em Encontrar tudo botão. Todas as células mescladas são listadas na parte inferior desta caixa de diálogo. Selecione todos os resultados encontrados mantendo pressionado o Shift chave.

Agora todas as células mescladas na planilha ativa são selecionadas quando você seleciona todos os resultados encontrados. Veja a imagem:

doc selecionar células mescladas 3

Dicas: Se você deseja apenas identificar, localizar e selecionar células mescladas em uma seleção, você precisa selecionar o intervalo primeiro.


Selecione e conte todas as células mescladas com o Kutools para Excel

Kutools for Excel's Selecione células mescladas ferramenta irá ajudá-lo a identificar, encontrar e selecionar todas as células mescladas em uma seleção com apenas um clique.

Kutools for Excel : com mais de 300 suplementos úteis do Excel, grátis para testar sem limitação em 30 dias. 

Depois de instalar Kutools for Excel, faça o seguinte :( Baixe grátis o Kutools para Excel agora! )

1. Selecione o intervalo de dados que você deseja selecionar nas células mescladas.

2. Clique Kutools > Selecionar > Selecione células mescladas, veja a captura de tela:

3. E todas as células mescladas na seleção foram selecionadas de uma vez, e o número de células mescladas também é contado, veja a captura de tela:

doc selecionar células mescladas 7

Dica: Para usar esse recurso, você deve instalar Kutools for Excel primeiro, por favor clique para baixar e ter um teste gratuito de 30 dias !

Identifique todas as células mescladas com o código VBA

VBA 1: Identifique e destaque todas as células mescladas

1. Segure o ALT + F11 chaves, e abre o Microsoft Visual Basic para Aplicações janela.

2. Clique inserção > Móduloe cole a macro a seguir no Módulo Janela.

Sub FindMergedcells()
'updateby Extendoffice
Dim x As Range
For Each x In ActiveSheet.UsedRange
If x.MergeCells Then
x.Interior.ColorIndex = 8
End If
Next
End Sub

3. aperte o F5 chave para executar esta macro. Todas as células mescladas na planilha ativa são identificadas e destacadas, veja a captura de tela:

doc selecionar células mescladas 4

VBA 2: Identifique e liste todas as células mescladas

1. Segure o ALT + F11 chaves, e abre o Microsoft Visual Basic para Aplicações janela.

2. Clique inserçãoMóduloe cole a macro a seguir no Módulo Janela.

Sub ListMergedcells()
'updateby Extendoffice
Dim x As Range
Dim sMsg As String
sMsg = ""
For Each x In ActiveSheet.UsedRange
If x.MergeCells Then
If sMsg = "" Then
sMsg = "Merged cells:" & vbCr
End If
sMsg = sMsg & Replace(x.Address, "$", "") & vbCr
End If
Next
If sMsg = "" Then
sMsg = "No merged cells."
End If
MsgBox sMsg
End Sub

3. aperte o F5 chave para executar esta macro, todas as células mescladas são listadas em uma caixa de diálogo pop-up. Veja a imagem:

doc selecionar células mescladas 5

Comments (12)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
Is it possible to identify the first and the last column number of the merged range in vba?
This comment was minimized by the moderator on the site
I require code to list merged ranges in a worksheet where the merged ranges are individually entered in cells starting at "A1" thus a3:c3 b2:b7 etc...........
This comment was minimized by the moderator on the site
well done You are a star... Thanks :-)
This comment was minimized by the moderator on the site
Very Nice thanks a lot
This comment was minimized by the moderator on the site
Actually I just about went mental trying to fix this in a spreadsheet. In desperation I selected all the cells (control A) clicked "merge and centre" and presto! it was fixed.
This comment was minimized by the moderator on the site
Probably obvious, but: In my last comment I should have made it clear you need to "select" each column, in turn, before scanning visually. Though really you only need to scan certain columns, I think: To the best of my knowledge, it's only cells containing text that will occasionally annex an adjoining cell, and numeric-only columns can be trusted not to do so. Even with text columns, you should be OK just checking every other column, because if any cell in the selected column has been involved in an annexation (to the right or from the left), that will show up in a visual scan of the selected column. I have never seen annexations occurring vertically, only horizontally. But if such a thing happened (a vertical annexation), you could try the same technique going row by row instead of column by column. The procedure is tedious, definitely. A royal pain, in fact. But if you have to sort your data, and Microsoft refuses to fix their bug, it's the only recourse I know of. Nowadays I try to remember to put a space character into each cell of the area I expect to use, prior to entering any other data, thus ensuring no annexations will occur.
This comment was minimized by the moderator on the site
thank u this help me to find merged cell in my excel
This comment was minimized by the moderator on the site
... so in the spreadsheet you spoke of, which was not set up with those protective space characters, my approach would be to visually scan each column which lies just to the right of any text column; and immediately after identifying & unmerging each occurrence, I would put a space character in the empty cell so the merging will not recur. Probably there's a VBA or other coding means to accomplish this much more efficiently. Anyone???
This comment was minimized by the moderator on the site
Actually I think this can be avoided entirely, if you remember to do so before entering data into any text column. In my experience the only time cells are clandestinely merged is when an empty cell is to the right of a text cell, where normally the display of the text would be extended to take advantage of the otherwise unused display space provided by the empty cell. Therefore, when initially setting up your spreadsheet, before entering any data, you can fill every "susceptible" cell with a single space—as many rows down as you expect to have data to fill. That space will be honored like any other text, and the cell to the left will not annex it.
This comment was minimized by the moderator on the site
If your spreadsheet is small (or you are desperate enough), the best way I've found is to select one column at a time and scroll all the way down to the bottom. Any merged cells will be obvious, because the entire merged cell is highlighted. You can then fix each one, one by one. But you risk wasting a lot of time doing this, since Excel continues to merge cells "behind your back" whenever it feels like doing so.* Therefore, cells you have just unmerged (or others which hadn't been merged before) may become merged while you believe you are finishing the unmerging process. I tried to find a way to completely disable the merging of cells but haven't found it. Better, of course, would be some way to keep Excel from engaging in this psychopathic behavior! *Yesterday, desperate, I did try to unmerge cells in a not-so-large spreadsheet (22 columns and fewer than 1,000 rows). Each time I thought I had finished and tried to sort, I got that same message. So then I tried another way to identify where the merged cells were—selecting a screenful of rows at a time and trying the sort on just those rows. Each time I got the message, I would try half the screenful at a time (etc.) until I identified the row(s) with merged cells. By going through the entire spreadsheet until each screenful had been successfully sorted, I figured the entire sort should work. But, NOT. Excel had been gleefully merging cells I had just unmerged. Please, someone, post a solution!
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations